The Best Steam Carpet Cleaning

Steam Carpet Cleaning

There are many different types of carpet and upholstery fabric in use today.
All carpet or upholstery fabric may be categorized as either natural or synthetic. Natural fibers derived from animals are composed of proteins like wool or silk while plant fibers like jute or cotton or sisal are composed of cellulose. Those who do steam carpet cleaning must always be aware of this, and modify their cleaning practices accordingly.

There are many kinds of man-made or synthetic fibers, including rayon, nylon, polyester, acrylic and so on.
Various types of carpet are used in different situations based on their particular properties, and this affords a wide variety of choice in material, style, and color. Fifth generation nylon is the most commonly found type of carpet in use today. They have been developed with special properties which give them high resistance to chemical reagents, abrasion, stretching, fluctuations in temperature, and the growth of mildew. No matter what type of carpet or upholstery is being used however, it will eventually get soiled and need to be cleaned.

There are two basic steps involved in carpet and upholstery cleaning by professionals. These are the removal of dry particulate matter from the carpet, and the solution or suspension of soils from the surface of the carpet or upholstery fibers, which is then extracted by vacuuming.
Vacuuming alone is sufficient to extract dry soil from among the fibers of the carpet or upholstery. Powerful vacuum cleaning equipment that is equipped with rotating brushes to agitate the surface of the fibers, is used by professional carpet cleaning companies. This step is usually done first in carpet and upholstery cleaning, because it is always easier to remove dry soil than wet soil.
Next the fabric is pretreated with carpet cleaning products to get the soil into suspension and enable it to be rinsed out of the carpet and vacuumed away into a waste tank. Water alone is never sufficient to remove all of the soil, despite what some people will claim. Water is a good solvent, but no matter what you may hear some people claiming, it is never enough to dissolve all soils.
There are four basic factors with affect the efficiency of the cleaning process. 1.
Chemical concentration
2. Heat of the reaction with the carpet cleaning products.
3. Agitation or scrubbing
4. Time allowed for the reaction


Professional carpet cleaners will pay a lot of attention to each of these factors. Each of these factors can affect the outcome of the cleaning significantly. Cleaning efficiency will always be affected if anyone of these factors is neglected during cleaning.
Several different kinds of tools may be used for carpet and upholstery cleaning. They are usually provided to help the carpet or upholstery cleaner to do everything outlined in the steps above easily and efficiently. However, it is often necessary to exercise discretion according to cleaning conditions. For example, if the fabric is heavily soiled, it may be necessary to use more of the carpet cleaning products, or allow it to remain on the fibers for a longer time in order to complete the chemical reaction effectively. But in all cases the longer the detergent remains on the surface of the fibers the more efficient the cleaning would be.
The best cleaning service is usually provided through steam carpet cleaning by professionals who are well trained in the chemistry of cleaning, and who use top of the line equipment to clean carpet or upholstery.

Comments are closed.